Orthopedic devices for penis enlargement have been used by men for more than a decade and have proven positive. The most widely used device is called an expansion, which is translated from English as an expander or filler. This fully reflects its purpose. It is characterized by the simplicity of design and assembly, which allows men to use both purchased (factory) and homemade extension. It is quite easy to do. The main thing is to have the necessary materials and basic knowledge about the mechanics of the home appliance.
Types and effect of expanders
The device works on the principle of the proliferation of cavernous bodies. This occurs under the condition of normal tissue tension due to periodic unrolling of the axes in the direction of increasing length. The growth of new tissue does not stop.
Average growth rates, according to user and manufacturer reviews, are an increase in length of 2-5 cm over 6 to 10 months. You should not expect immediate results. It will take patience and regular use of the extension. Violation of this recommendation will result in failure to achieve the desired result.
Depending on the method of attachment, extensions are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum expansion
The perimeter is carried out using a special vacuum chamber. It covers the head of the penis by about 3-7 cm in circumference. It is considered the most reliable and safe. The risk of injury is practically reduced to zero, since there is no risk of compression.
Extension for penis enlargement
Loop and strap extension
The fastening mechanics are almost the same, but the shape of the fastening is different. In the first case, a loop is used, and in the second, a strap is used. The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can strongly compress the head, disrupting the blood supply to the reproductive organ, but remains the most common option.
How to make an extension with your own hands at home?
You can make any of the three types of devices listed. The most difficult to build will be the void due to the fact that you will have to build a chamber. Otherwise, the process will not have significant differences.
Withdrawals
Make a schematic diagram of the device yourself. To make a plan, it is enough to study the plan from any well-known manufacturer. Based on a photo, a drawing, a video, they outline their sketch. The length of the side posts is chosen based on the desired effect. It can range from 20 to 25 cm.
Required materials and tools
A homemade extension at home is assembled from the same parts as the factory one. The specific materials depend on the type of structure being assembled:
- The suspension ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the hardware. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the width of the penis cross-section. It is best to use a sterile dressing before use, which is changed each time.
- Slats (side bars) are selected so that they can stabilize the required length for a long time. These can be dies, rods, chrome rays.
- The vacuum chamber and bulb must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a variety with a camera, you should prefer not a plastic bottle as written in some sources, but buy a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic home extension
Step by step assembly instructions
The construction of a strap or loop device involves performing the following series of tasks:
- A piece with a diameter of 11 cm is cut from a piece of plywood or other material with a thickness of no more than 10 mm. A hole with a circumference of at least 5. 5 cm is determined by the cross section of the penis.
- The length of the rods is 20-30 cm. They are completely screwed to the plywood, leaving a little on top. The entry points are filled with glue.
- They screw a "lamb" on each.
- Strips are cut from a thin metal plate and holes are made in them.
- A clamp of soft tubes or a strap is inserted into the holes, which can be used as medical wide tourniquets.
- Check the reliability of the fastening.
The assembly of the vacuum variety differs only in that a jar with a pear is attached to the end. Not everyone has such a device at home, but it is freely sold in pharmacies in the city. The radius varies from 13 to 25 mm. It is chosen according to the size of the reproductive organ. The tightness of the clamp is ensured by a rubber casing. Its length must be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped thanks to a bulb or a connector with a hose. You can use the tonometer item. The stop valve is unscrewed from it and inserted from the other end. This allows you to change the operating principle. The pear will begin to pump instead of pumping air. As you can see, you will have to deal with more than with a strap and loop device.
To help you understand the principle of assembling an extension with your own hands at home, a video will help you, which clearly shows how the elements are connected, as well as what materials they are made of.
Extender for penis enlargement - tied below the knee
How and when to use?
The indication of use of the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself if he is satisfied with his reproductive organ or if he wants to have more. To increase the size of the phallus, you need to wear a home or factory device for at least 4-6 hours a day. The design allows you to hide the extension under clothing. People around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit comfortably on the pubic bone.
- The foreskin is retracted and a camera, loop or strap is attached to the glans. It is necessary to make sure that the blood flow has not been disturbed (no excessive pressure, changes in the shade of the sheath).
- Adjust the length of the bars. There should be no painful sensation. The parameter is gradually increased, allowing the organ to get used to the degree of tension, that is, to train the phallus.
When possible, massage the penis every hour. This allows it to quickly adapt to loads. After the specified time, the device is removed and the flesh is kneaded using special creams for intimate use. The device is thoroughly disinfected each time and placed in a clean package for storage.
Advantages and disadvantages of homemade constructions
The advantages of a home stretcher include the following parameters:
- the opportunity to try the stretcher without buying a device.
- relative cheapness;
- obtaining a design that fully corresponds to the parameters of the phallus.
There are actually very few advantages. There are more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that will twist, wear, take off and will not press anywhere and will not slide.
Which extension is better - factory or homemade?
To answer this question, it is enough to compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods every time for a long time so that they do not compress the head of the penis. Another point is that it is quite difficult to make a vacuum model. By the way, it is usually less effective than homemade loop and strap.
- Cost, which was mentioned as an advantage, is a relative advantage. Today there are Chinese models, which cost 1-3 thousand rubles. This is no more expensive than a homemade extension. Nobody will sell half a meter of hairpins or 20 centimeters of textolite. You will have to buy a lot more hardware that will sit idle. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, as it will be inconvenient to use. You have to spend a lot of time to put on and take off, and considering the fact that self-massage is recommended periodically, it is also less effective.
One conclusion can be drawn - the factory device is better. To try this method of penis enlargement, you can simply buy an inexpensive model
What risks can there be when using a home appliance?
Specialists and specialists do not recommend assembling an extension yourself without the appropriate skills. If the device turns out to be "clumsy", presses, squeezes, causes discomfort, its use is not highly recommended. This can lead to unpleasant consequences.
Homemade extension
A well-assembled device will not be inferior in performance to a factory one. It will only be aesthetically unappealing. Otherwise there will be no difference, but there is a nuance here too. Many users write that with prolonged use, hematomas, compressions and irritations form on the dermis.
This may be due to low quality materials. Finding medical silicone in a pharmacy is almost impossible. If one is sold, its properties leave a lot to be desired, and with prolonged contact, negative consequences begin to appear.